The Brockwood Stall Shi*fter Prices
Featured below is a cost benefit analysis of using the
Brockwood Stall
Shi*fter. This shows the daily cost of horse stall cleaning using the
manual method of manure removal and the automatic horse stall cleaning
system with a manure and bedding sifter.
Manual Picking vs. Automatic Sifting
Savings are based on labor cost of $7.50/hour and
shavings cost of $4.50/bale
Times to clean and bedding usage based on 1999 survey of 80 Stall
Shi*fter users.
| Single stall |
Manual |
Automatic |
Savings |
| Time to clean |
15 minutes |
5 minutes |
10 minutes |
| Daily shavings use |
½ bale |
¼ bale |
¼ bale |
| Daily Labor cost |
$1.88 |
$0.63 |
$1.25 |
| Daily Shaving cost |
$2.25 |
$1.125 |
$1.125 |
Total Daily Savings per Stall is $2.37
Daily savings in a 10 stall stable is $23.70
Three month savings in a 10 stall stable is $2,133.00
The conclusion of stable managers who changed from manual to
automatic sifting is unanimous. None would go back to the manual
system. The main objection of stable owners to making the change is the
up-front investment. The key word here is investment. In a ten-stall
stable it can take just a few months for the investment to be
recovered.
Deluxe Hybrid Woody
- Frame construction: 14
ga steel tube, powder coated baked enamle finish
- Rear Wheels: 20 inch semi
pnumatic rubber tires, Nickle plated rims w/wire spokes, 1/2 in sealed
bearing hubs.
- Front Wheels: 20 inch
semi pnumatic rubber tires, Nickle plated rims w/wire spokes, 1/2 in
sealed bearing hubs.
- Motor compartment: 7 ply
1/2" oak panels w/ 1.5" solid hardwood sides and supports. Banner Red
exterior acrylic enamel, 2 coats.
- Screen frame: 7 ply 1/2"
oak side panels w/ 1.5" solid hardwood front. Banner Red exterior
acrylic enamel, 2 coats.
- Screen material: 16 ga,
1/2 inch flattened expanded metal w/ baked enamel finish
- Motor: Leeson,120 VAC,
1/3 hp, industrial grade, totally enclosed fan cooled, dust free
motor.
- Drive assembly: Specially
designed belt driven crank shaft w/heavy duty mount and sealed main
bearings.
- Connecting Rod: Heavy
duty 3/8" tie rod ends, NASCAR approved, high grade steel on steel Hime
joints.
- Electrical: Comes with 25
foot extension cord and dust proof lighted push button on/off switch.
- handle: 1/4" solid
steel extenders w/foam padded hand piece with naugahyde cover.
- Options: special screens
available for sifting specialty materials.
- 3 year warranty on parts and
labor
- 15 day free trial
$2249.00
After you have viewed
the video
and read all about the Stall Shi*fter on our pages here, it is our hope
that you will have a pretty good idea of whether or not a Stall
Shi*fter will work for your operation. We further hope that you will
pick up the phone and call us to place an order for the machine that
best suits your needs. If you have any doubt of our sincerity or our
product our 15 day free trial should remove it. We do not expect you to
keep a product that doesn't work for you as expected after giving it a
fair trial. You will know without a doubt after trying it. Your only
risk is shipping charges.
